Midea MOB30-09HFN8-QRE6GW, Руководство пользователя

Страница: 21 / 63

User manual Innova IMRZ
21
ENGLISH
SETTING SWING-FUNCTION
OF AIR FLOW
Setting vertical swing-function of air flow
While the unit is on, use the SWING (vertical airflow)
button to set the direction of airflow.
1. Press the SWING (vertical air flow) button on the
remote control once to activate the louver. Each
time you press the button, it will adjust the louver
by 6°. Press the button until the direction you
prefer is reached (see Fig.A)
2. To make the louver swing up and down
continuously, press and hold the SWING (vertical
air flow) button for 2 seconds. Press it again to
stop the automatic function.
Setting horizontal swing-function of air flow
While the unit is on, use the SWING (horizontal air
flow) button to set the direction of airflow.
1. Press the SWING (horizontal air flow) button on the
remote control once to activate the louver. Each
time you press the button, it will adjust the louver
by 6°.
Press the button until the direction you prefer is
reached (see Fig.B).
2. To make the louver swing left and right
continuously, press and hold the SWING (horizontal
air flow) button for 2 seconds. Press it again to top
the automatic function.
NOTE ON LOUVERS
Do not move louver by hand. This will cause the louver
to become out of sync. If this occurs, turn off the unit
and unplug it for a few seconds, then restart the unit.
This will reset the louver.
Intelligent Eye Operation
While the unit is on, press the Intelligent eye button
on the remote control to select wind flow follow people
feature or wind flow away from people feature. The
intelligent eye can detect people’s activities in the
room and adjust the horizontal angle of air flow to
implement wind flow follow people feature and wind
flow away from people feature.
Do not put your fingers in or near the
blower and suction side of the unit.
The high-speed fan inside the unit may
cause injury.
CAUTION!
Left (75° +10°)
Right (75° -10°)
Middle (30° +10°)
Air conditioner
Intelligent eye
Detectable area
For example: Detectable area at 25°C.
The detectable range is varied according
to the room temperature.