Midea MLE41N1AWWC, Руководство пользователя и инструкции по установке

Страница: 17 / 64

17
INSTALLATION INSTRUCTIONS
2 Connect one end of the exhaust ducting to your dryer, then use duct tape to secure the ducting to your dryer.
The crimped ends of the duct sections must point away from your dryer. Use a 4 in. (10.2 cm) diameter rigid
metal duct.
3 Connect the other end of the ducting to the exhaust hood. Tape all joints, including at the dryer.
Step 4: Level your dryer
t
If your dryer is not level, carefully tilt your dryer just enough to adjust the leveling feet on the bottom of your
dryer. Extend the feet only as much as is necessary. If the feet are extended too much, your dryer may vibrate.
Step 5: Plug in your dryer
Make sure that all exhaust and electrical connections are complete, then plug your dryer into the electrical outlet.
Step 6: Check the final installation
t
Before you use your dryer, make sure that:
t
Your dryer is plugged into an electrical outlet and is properly grounded.
t
You used rigid or stiff-walled flexible metal vent material. You did not use a plastic flexible ducting.
t
The exhaust duct work is hooked up and the joints are taped.
t
The dryer is level and sits firmly on the floor.
t
Start your dryer to confirm that it runs, heats, and shuts off.
Level
Tighten
Loosen
Adjustable
leg
%2