17
Timer operation
To Set the Auto - On Time
Pressing the
SET
button is used to set the auto-on/off
time of the unit.
1. Press the
SET
button
, the Timer on
indicator "
" displays and flashes,
the last Auto-on setting time and the signal
"h"
will be shown on the LCD display area.
Now it is ready to reset the Auto-on time to
START the operation.
2. Press the
or
button to your
desired Auto-on time. Each time you press the
button, the time increases/decreases by half
hour increments between 0 and 10 hours and
by one hour increments between 10 and 24
hours.
3. Once your desired time on is reached there will
be a three second delay before the remote
controller transmits the signal to the air
conditioner. Then the signal
"h"
will
disappear, the Timer on indicator will remain
on and the Set temperature will re-appear on
the LCD display window.
To Set the Auto - Off Time
1. Press the
SET
button
until the Timer on
indicator"
“displays and flashes,
the last Auto-off setting time and the signal
"h"
will be shown on the LCD display area.
Now it is ready to reset the Auto-off time to
STOP the operation.
2. Press the
or
button to set desired
Auto-off time. Each time you press the button,
the time increases/decreases by half hour
increments between 0 and 10 hours and by
one hour increments between 10 and 24
hours.
3. Once your desired time off is reached there will
be a three second delay before the remote
controller transmits the signal to the air
conditioner. Then the signal
"h"
will
disappear, the Timer off indicator will remain
on and the Set temperature will re-appear on
the LCD display window.
.
NOTE:
When you select the timer operation, the
remote controller automatically transmits
the timer signal to the indoor unit for the
specified time. Therefore, keep the remote
controller in a location where it can
transmit the signal to the indoor unit
properly.
