16
Set the time by touching the slider control (e.g.9), now the
timer you set is 96 minutes.
When the time is set, it will begin to count down immediately.
The display will show the remaining time and the timer
indicator flash for 5 seconds.
When cooking timer expires, the corresponding cooking zone
will be switched off automatically.
1)
Other cooking zone will keep operating if they are turned on previously.
2
）
The red dot next to power level indicator will illuminate indicating that zone is selected
set more zones:
The steps for setting more zones are similar to the steps of setting one zone;
When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking
zones are on. The minute display shows the min. timer. The dot of the corresponding zone flashes.
The shown as below:
(set to 15 minutes)
(set to 45 minutes)
Once the countdown timer expires, the corresponding zone
will switch off. Then it will show the new min. timer and
the dot of corresponding zone will flash.
The shown as right:
(set to 30 minutes)
Touch the heating zone selection control, the corresponding timer will be shown in the timer indicator.
3.4.8 Using the Pause control
1. When the cooking zones are running, touch the " "
control, all the displays will show " " and stop heating.
At this moment only " " and " " “Lock” control
can be operated.
2. Touch " " again, the displays show the original setting, and the cooking zones keep on heating.
3.4.9 Default working times
Auto shut down is a safety protection function for your induction hob. It shut down automatically if ever
you forget to turn off your cooking. The default working times for various power levels are shown in the
below table:
Power level
Keep warm 1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
8
4
4
4
2
2
2
When the pot is removed, the induction hob can stop heating immediately and the hob automatically
switch off after 2 minutes.
Содержание MI60S
Страница 28: ......
