8
OPERATING INSTRUCTIONS
FAN SPEED button
: This button is used to select the desired fan speed. Each time you push
the button, a fan speed is shifted in the direction of the arrow:
AUTO LOW HIGH
NOTE:
You can not select a fan speed under AUTO and DRY mode. The fan motor operates at
pre-set AUTO speed under AUTO mode and at LOW speed under DRY mode.
Fan speed displaying:
The display is separated into 3 zones. When setting the speed, the corresponding zone will
illuminate.
Select LOW fan speed and the first zone will illuminate;
Select AUTO fan speed and zones 1~2 will illuminate;
Select HIGH fan speed and zones 1~3 will illuminate.
Once selected, after 2 seconds the zones will illuminate gradually based on the speed selected.
For example, HIGH fan speed will show the display illuminating quickly from zone to zone.
Note:
when the indoor fan is stopped, nothing will display.
1
2
2
3
2
3
3
ASSIST FUNCTION
button
: Use this button to select or cancel the assist feature.
Press this button, then press the ADJUST
"
"
and
"
"
button to select the desired feature.
Each time the button is pressed, the mode is shifted in the direction of the arrow:
Once the desired feature is established, press the ASSIST FUNCTION button again to
register .
NOTE:
The above illustration is for explanation purpose only. The features are different
depending on models.
Left/Right airflow:
Enables you to set the desired left/right airflow direction.
Sleep operation:
Choose this feature to go into the energy-saving operation. It is only available
on Cool, Heat or Auto mode. Under Sleep mode, the air conditioner will automatically increase
O
(cooling) or decrease(heating) 1 C per hour in the first two hours, then hold steady for the next 5
hours, after that the unit will stop operation. It can maintain the most comfortable temperature
and save energy. The fan speed is forced AUTO.
Relative indicator lights up under the different mode settings:
TIMER ON
TIMER OFF
S
Cooling only models without (Electrical heating) feature.
S
Electrical heating
operation:
When select this function in heating mode, the auxiliary electric
heater(PTC) is activated and brings faster and stronger heating.
NOTE:
This function is only available for the units adopted PTC.
