Page 7
The power supply cord contains a current
device that senses damage to the power
cord. Test your power supply cord as
follows:
1. Plug in the air conditioner.
2. The power supply cord will have TWO
buttons on the plug head. Press the
TEST button. You will notice a click as
the RESET button pops out.
3. Press the RESET Button. Again you will
notice a click as the button engages.
4. The power supply cord is now
supplying electricity to the unit. (On
some products this is also indicated by
a light on the plug head.)
Saf
ety
Pr
ecautions
Operation of Current Device
To reduce the risk of fire, electrical shock, or injury to persons when using your air
conditioner, follow basic precautions, including the following:
• Be sure the electrical service is adequate for the
m
odel you have chosen. This
infor
m
ation can be found on the rating label, which is located on the side of the
cabinet and behind the grille.
• If the air conditioner is to be installed in a window, you will probably want to clean
both sides of the glass first. If the window is a triple-track type with a screen panel
included, re
m
ove the screen co
m
pletely before installation.
• Be sure the air conditioner has been securely and correctly installed according to
the installation instructions in this
m
anual. Save this
m
anual for possible future use
in re
m
oving or installing this unit.
• When handling the air conditioner, be careful to avoid cuts fro
m
sharp
m
etal fins
on front and rear coils.
WARNING - Prevent Accidents
• Do not use this device to turn the unit on or off.
• Always
m
ake sure the RESET button is pushed in for correct operation.
• The power supply
m
ust be replaced if it fails to reset when either the TEST button
is pushed, or it can not be reset. Please contact Custo
m
er Service.
• If power supply cord is da
m
aged, it can not be repaired. It MUST be replaced with
a new cord. Please contact Custo
m
er Service.
NOTES
RESET
TEST
Plug in &
press RESET
Содержание MAW15R1YWT
Страница 30: ......
