Midea MAW15R1YWT, Руководство пользователя

Страница: 18 / 30


Page 18

5 Install Support Bracket
1. Hold each support bracket flush against outside of
sill, and tight to bottom of cabinet as shown in Fig.
26. Mark brackets at top level of sill, and remove.
Fig. 25
3. Shift cabinet left or right as needed
to line up center of cabinet on center
line marked on sill.
4. Fasten cabinet to window sill with 2
screws into holes (You may wish to
pre-drill pilot holes).
5. Add bottom rail seal over screws to
window sill. (Fig. 25).
Bottom
Rail Seal
3/4” (or 1/2”) Long
Hex-head Screw
Fig. 27
Right
Left
Locknut
Sill Angle
Bracket
Flathead Bolt
2 Each Required For
Each Support Bracket
1/2” Long Screws
and Locknuts
Fig. 26
Mark
2. Assemble sill angle bracket to support
brackets at the marked position (Fig.
27). Hand tighten only so adjustments
can be made later.
3. Install support brackets (with sill angle
brackets attached) to correct hole in
bottom of cabinet as shown in Fig. 28.
4. Tighten all 6 bolts securely.
Fig. 28
1/2” Long
Screws and
Locknuts
Ins
tallation
Ins
tructions