Midea MA500W21/W, Руководство пользователя

Страница: 32 / 44

9
10
There are two ways to place the end of drain hose:
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
Trough
Hose
Retainer
Bin
d
M
in
.8
6c
m
M
ax
.1
00
cm
Warning!
M
in
.
86
cm
10
0c
m
M
ax
.
1.
Check if the legs are closely attached
the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.
Check alignment of the product with a
spirit level and if required, correct.
3.Loosen the lock nut and turn the feet
until it closely contacts with
to
the floor.
4.After being locked properly, press four
corners again to make sure that they has
been adjusted properly.
• The lock nuts on all four feet must be screwed tightly against the housing.
Levelling the washing machine
Warning!
INSTALLATION
Installation of drain hose
1.Completely sleeve the drain hose over the sewer.
2.Fix and tighten it with a hoop.( As shown in the figure )
• Note: The drain hose of the machine with upper drain system has already been
assembled before leaving the factory. This picture is suitable for lower drain system.
Note!
Lock nut Foot
Right
Wrong
Raise Lower
Lock Loosen