Midea HS-338FWEN-W, Инструкция по эксплуатации

Страница: 31 / 41

26
Select to
enter into
forced
defrosting
mode
Enter into test mode and press
button for the second time
LED indicators on Gear 2, 3 and 4 light up and
other LED indicators light on, then the
compressor and the fan will stop working, The
heater open, refrigerator into forced frost
In forced defrosting mode,
when the defrosting sensor
reach a temperature of 12°C
and the defrosting heater has
been working for 3 minutes,
then the refrigerator will exit the test mode and
return to normal operation mode
In forced defrosting mode, if
the temperature of defrosting
sensor is always lower than
12°C and the defrosting heater
has been working for 1 hour,
then the refrigerator will exit the test mode and
return to normal operation mode
Select to
exit the
test mode
Enter into test mode and press
button for the third time
then the refrigerator will exit the test mode and
return to normal operation mode
9.10 Self-diagnosis

Conditions for entering into this mode
When the power is on for the first time, here is no sensor failure and the defrost sensor
temperature is equal to or more than 0°C.

Self-diagnosis process
1. Defrost heater is on for 2 seconds and off for 2 seconds;
2.The fan is on for 10 seconds and off for 2 seconds;
3.The refrigerator is refrigerating for 20 minutes. (The compressor fans are all on)

Exit out of self-diagnosis
1.Stop self-diagnosing and turn into normal mode;
2.Failure occurs to the sensor during self-diagnosis and exit out of self-diagnosis mode;
3.Set forced defrosting function during self-diagnosis.