Midea HS-338FWEN-W, Инструкция по эксплуатации

Страница: 26 / 41

21
3.Condenser
4.Anti-condensationg tube
7.Suction pipe
8.Return transition pipe
Starter and protector of the compressor
1. Remove the screws
1
）
Two screws outside
2
）
One screw inside
2. Remove the clipping strip
Slowly pull it out
3. Remove the protective cover
1
）
Pry the protective cover slowly from the upper part,
2
）
Pull it out and remove it.
4. Remove the starter and protector
Unplug the starter and protector (you can use a screwdriver
to pry it slowly)
5. The reverse process can complete installation. /
8.7Display and main control panel
Display control board