Midea HC-683WEN(ESNY), Руководство пользователя

Страница: 6 / 20

Refrigerators transpoction and location
Transportion
Please don't inverted,squeezed, virbration refrigertor. when moving, the tilt
angle can't larger than 45 degree.
When moving, dont cling the door or coping.
Location
Ensure proper air circulation around refrigerator , dont place the unit near heat source, direct
sunlight , moisture or water, avoid rust and weakening the insulation.
Top space at least 30cm , space on both the sides and back at least 10cm from the wall, So
refrigeratordoor can open or close convenience and emanate heat.
Installing the refrigerator on solid , level floor(If don't level ,it can adjust the leveler to level.)
Attention
Dont allow the power cable pressed by refrigerator or other heavy object ,lest damaging the
power cable ,it may arouse suddenness.
Before connecting the power ,please checking the voltage range of refrigerator and power supply
carefully.
Start using
Before it is used, make sure that the refrigerator is installed on the solid and level f­
loor .. To understand all the attention to security matters.
1. After unsealing the refrigerator, to fix lower cover on the refrigerator.
(If the door rugged, Please refer to the adjustment instructions which locate in the lower
left corner of the right panel of Refrigerator to adjust.)
2.Connect to power supply
After connecting to power supply, the refrigerator is in the default status,and it
shows the actual chilled and frozen temperature . The refrigerator has a Power-down
memory, The first time when it is power on, then every time will be set up at the last
power-down operation.
3.Work model of the refrigerator
Human mode:You can useTemperature
Control keys to set the temperature.
4.Put the food into the refrigerator
After a period of time of the operation of electricity, the refrigerator inside is already
5