8
Install the filter on the other side.
Repeat steps mentioned in Figure
1-7, to complete installation of the
filter on the other side, and plug in
the power to operate the machine.
7
Install the air inlet grille.
Align the slot position at the bottom,
press both sides of the upper part of
the air inlet grille, and buckle up the
air inlet grille.
Installation Steps
INSTALLATION INSTRUCTIONS
Test Run
INSTRUCTIONS
• This machine is provided with a disassembly protection function. The machine can only operate
normally after the air inlet grille and air outlet grille are installed properly.
• In case of continuous electricity, it enters the working mode before the standby state after each time
of power on.
• The machine is connected to the power again after unexpected power outage (when the power is
off or the power cord is unplugged during normal operation), and then restores to the working state
before the power outage.
Flash for 1s.
1
Preparations
Power on for the first time, the display
panel flashes for 1s, and then the screen
is turned off. The whole machine is in the
standby state;
2
Switch
On/Off button can be pressed.
6
Notice
