How To Use
1
For first time use or using after not using kettle for a long time, it is recommended
that you fill the kettle with fresh water to the max level, boil and empty the kettle at
least 2 times to clear the kettle of any tiny particles. Do not drink the water used for
this.
Press the lid switch and the lid flips open automatically.
Remove the kettle from the base. Fill the kettle with desired amount of water (no
less than the minimum, no more than the maximum). Close the lid. Place the
kettle back on the base.
Connect the plug to a power outlet (220~240V AC), turn the kettle on by
pressing the power switch. The light will illuminate to indicate the kettle is
heating the water.
The kettle will automatically stop (indicated by the light turning off) once the
water has boiled.
Lift the kettle from the base and pour the water into a container.
3
.
.
.
.
.
5
Add 0.5L white vinegar and fill the kettle with water. Allow to stand for at least
1 hour.
Empty the solution from the kettle. Wipe of remaining deposits with a damp
cloth.
.
.
.
To prolong the lifespan of the kettle, please clean the kettle
regularly to prevent mineral deposit build up.
After use, always unplug and let kettle cool down before cleaning.
Do not use chemical, steel wool or abrasive cleaners to clean the
outside of the kettle as these may scratch the surface and cause
the color to fade.
6
