Midea CSU 12HCAA, Руководство по установке и обслуживанию

Страница: 54 / 107

第
6
页 共
59
页
There is risk of fire and electric shock.
■
Do not allow water to run into electric parts.
It may cause fire, failure of the product, or electric shock.
■
Do not store or use flammable gas or combustible near the product.
There is risk of fire or failure of product.
■
Do not use the product in a tightly closed space for a long time.
Oxygen deficiency could occur.
■
When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on.
Do not use the telephone or turn switches on or off. There is risk of explosion or fire.
■
If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect the power
supply cable.
There is risk of electric shock or fire.
■
Stop operation and close the window in storm or hurricane. If possible, remove the product from the window
before the hurricane arrives.
There is risk of property damage, failure of product, or electric shock.
■
Do not open the inlet grill of the product during operation. (Do not touch the electrostatic filter, if the unit is so
equipped.)
There is risk of physical injury, electric shock, or product failure.
■
When the product is soaked (flooded or submerged), contact an Authorized service center.
There is risk of fire or electric shock.
■
Be caution that water could not enter the product.
There is risk of fire, electric shock, or product damage.
■
Ventilate the product from time to time when operating it together with a stove, etc.
There is risk of fire or electric shock.
■
Turn the main power off when cleaning or maintaining the product.
There is risk of electric shock.
■
When the product is not be used for a long time, disconnect the power supply plug or turn off the breaker.
There is risk of product damage or failure, or unintended operation.
■
Take care to ensure that nobody could step on or fall onto the outdoor unit.
This could result in personal injury and product damage.
﹥
CAUTION<
■ Always check for gas (refrigerant) leakage after installation or repair of
product.
Low refrigerant levels may cause failure of product.
■
Install the drain hose to ensure that water is drained away properly.
A bad connection may cause water leakage.
■
Keep level even when installing the product.
To avoid water leakage from vibration
。
■
Do not install the product where the noise or hot air from the outdoor unit could damage the neighborhoods.
It may cause a problem for your neighbors.
■
Use two or more people to lift and transport the product.
Avoid personal injury.
■
Do not install the product where it will be exposed to sea wind (salt spray) directly.
It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause
product malfunction or inefficient operation.