background image

8

OPERATING INSTRUCTIONS

Airflow direction control

Adjust the air flow direction properly otherwise, it

might cause discomfort or cause uneven room
temperatures.

Adjust the horizontal louver using the remote

controller.

Adjust the vertical louver manually.

Perform this function while the unit is in operation.
Use the remote controller to adjust the air flow
direction. The horizontal louver can be moved at
a angle of 6 for each press or set to move up
and down automatically. Please refer to the
REMOTE CONTROLLER OPERATION MANUAL
for details.

To set the vertical air flow(Up--Down) direction

O

Adjust the vertical louver manually using the lever
on the left or right side of the vertical louver arm
(Depending on model). Take care not to catch
fingers on the fan, horizontal louver or to damage
vertical louvers. When the air conditioner is in
operational and the horizontal louver is in a specific
position, move the lever at left (or right, depending

on model) end of the air outlet to the desired position.

To set the horizontal air flow direction (left - right)

The DIRECTION/SWING button will be disabled when the
air conditioner is not in operation(including when the TIMER

is set).

Do not operate the air conditioner for long periods

the

air flow direction set downward in cooling or dry mode.
Otherwise,

may occur on the surface of the

horizontal louver causing moisture to drop on to the floor or
on furnishings.
Do not move the horizontal louver manually. Always use the
DIRECTION/SWINGbutton. If you move this louver
manually, it may malfunction during operation. If the louver
malfunctions, stop the air conditioner once and restart it.
When the air conditioner is started immediately after it was
stopped, the horizontal louver might not move for
approximately 10 seconds.
Open angle of the horizontal louver should not be set too
small, as COOLING or HEATING performance may be
impaired due to too restricted air flow area.
Do not operate unit with horizontal louver in closed position.
When the air conditioner is connected to power (initial
power), the horizontal louver may generate a sound for 10
seconds, this is a normal operation.

ON

with

condensation

CAUTION

!

Range

Range

Vertical
louver

,,

,,

Up-down air flow

Left-right air flow

Содержание CS494-U
















Отзывы: