Midea CS494-U, Руководство по эксплуатации

Страница: 10 / 15

9
OPERATING INSTRUCTIONS
AUTO operation
SLEEP operation
DRYING operation
When you set the air conditioner in AUTO mode,
it will automatically select cooling, heating(cooling
/heating models only), or fan only operation
depending on what temperature you have selected
and the room temperature.
The air conditioner will control room temperature
automatically round the temperature point set
by you.
If the AUTO mode is uncomfortable, you can
select desired conditions manually.
When you push SLEEP button on remote
controller during cooling, heating(cooling only type
without), or AUTO operation , the air conditioner
will automatically increase (cooling) or decrease
(heating) 1
per hour for the first two hours, then
hold steady for the next 5 hours, after that the unit
will stop operation. The fan speed will be auto-
matically controlled. This feature can maintain the
most comfortable temperature and save more
energy for you.
The fan speed will be automatically controlled
under dry operation.
During the dry operation, if the room temperature
is lower than 10 C, the compressor stops operation
and restarts until the room temperature is above
12 C.
O
O
To achieve optimal performance, please note the
following:
Adjust the air flow direction correctly so that it is
not directed on people.
Adjust the temperature to achieve the highest
comfort level. Do not adjust the unit to excessive
temperature levels.
Close doors and windows on COOL or HEAT
modes, or performance may be reduced.
Use TIMER ON button on the remote controller to
select a time you want to start your air conditioner.
Do not put any object near air inlet or air outlet, as
the efficiency of the air conditioner may be reduced
and the air conditioner may stop running.
Clean the air filter periodically, otherwise cooling or
heating performance may be reduced.
Do not operate unit with horizontal louvre in closed
position.
1 hour
1 hour
Set
Temperature
Cooling
1
1
Heating
SLEEP operation
How the air conditioner works
Optimal operation
1
1
1 hour
1 hour
Set
Temperature
SLEEP operation
7 hours timer off
7 hours timer off