Midea CE-BCD505WE-ST, Руководство по обслуживанию

Страница: 35 / 53

Service Manual , 2016-12
34
/
51
You need a suitable adapter for connecting the
water pipe with the water tap.
1) Please insert the water pipe(14) into one end
of adapter(13);
2) Fix another end of adapter on the water tap.
3) Remove the cap of water pipe(16);
4) Insert the end of water pipe into one end of
fast connector(15);
Disassembly of filter(refer to A or B)
Disassembly of filter inside
The filter is located in the upper right of the
refrigerator, rotate 90 ° in the direction of the
arrow to remove the filter.
Disassembly of filter outside
Pull out the plug. Turn off the water intake.
Take off the filter and the snap ring on the
quick connector
and then pull out the water pipe. Insert the new
filter into the quick connector and then install
the snap ring. Re-supply water and check
whether there is water flowing out.
If necessary, please repeat above steps. Insert
the plug again. Keep pressing the
button for3 seconds to start up the filter. The
display ofdisappears.