Service manual for Dryer Machine Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
-
29
-
4. TROUBLE SHOOTING
4.1 Test mode
1. Make sure the door are closed, press [WRINKLE CARE] and [START/PAUSE] at the same
time within 3s after power on, then unit will go into test mode, the screen will circularly
show main version number and display version number.
2. Press [START/PAUSE], All lights are on, the display shows the current temperature of NTC
(If the NTC fails, the display shows the fault code
“E5”).
At the same time, the motor rotates in the forward direction, and the heating tube starts after
3 seconds .
3. Press the [START/PAUSE] button again, the lights flash, turn the
“Signal” knob one turn (if
have), the
“Drying” stroke light goes off; turn the “Dry Temp.” knob one turn, the “Cooling”
stroke light goes off; turn the Cycle knob one turn, the
“Wrinkle Care” light goes off; turn
the
“Dry Level” knob one turn, the “Clean Filter” light goes off.
4. After the final
“Damp Dry Signal” knob (if have) is turned for one turn, the test ends and the
load is turned off.
Содержание 22038210001121
Страница 31: ...Service manual for Dryer Machine Midea America Company 31 4 3 Wiring diagram and terminals ...
Страница 32: ...Service manual for Dryer Machine Midea America Company 32 ELECTRIC MODEL GAS MODEL ...
Страница 49: ...Service manual for Dryer Machine Midea America Company 49 6 EXPLODED VIEW ELECTRIC MODEL ...
Страница 50: ...Service manual for Dryer Machine Midea America Company 50 GAS MODEL ...