Midea 22038210001121 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 56

background image

Service manual for Dryer Machine Midea America Company

-------------------------------------------------------------------------------------------------------------------------------------------------------

－

18

－

Electric models - Canada only

- A 120/240 volt, 60Hz AC approved electrical service fused through a 30-ampere fuse or circuit

breaker on both sides of the line is required.

- All Canadian models are shipped with the power cord attached. The power cord should be

plugged into a 30-ampere receptacle.

3.6 Grounding

This appliance must be grounded. In the event of malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a path of least resistance for electric current.

Gas and Electric models

-

Certain internal parts are intentionally not grounded and may present a risk of electric shock

only during servicing. Service Personnel

– Do not contact the following parts while the

appliance is energized: inlet valve, control board and temperature-regulating thermistor

(located on blower housing).

Gas models

- Your dryer has a three prong power cord with grounding conductor.120V 60 Hz

- The plug must be plugged into an appropriate individual outlet that is properly installed and

grounded in accordance with all local codes and ordinances.

Electric models

Dryer must be grounded with 3 or 4 wire cord power cord with ground grounding conductor and a

grounding plug, which is sold separately.

- The plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

- Do not modify the plug provided with your dryer -

if it doesn’t fit the outlet, have a proper outlet

installed by a qualified electrician.

- If a power cord is not used and the electric dryer is to be permanently wired, the dryer must be

connected to a permanently grounded metal wiring system, or an equipment grounding

conductor must be run with the circuit conductors and connected to the equipment grounding

terminal or lead on the dryer.

«
...
16
17
18
19
20
...
»

Содержание 22038210001121

























































Отзывы:

Нет отзывов

Похожие инструкции для 22038210001121

Бренд: Maestro Страницы: 48

Бренд: V-ZUG Страницы: 40

Бренд: COMAC Страницы: 2

Бренд: Sencor Страницы: 8

Бренд: B-TEC Страницы: 11

Бренд: Adler Europe Страницы: 68

Бренд: 4CR Страницы: 11

ADVANTAGE Series

Бренд: Amera Products Страницы: 2

0.9L Deep Fryer

Бренд: Bella Страницы: 36

Бренд: Adler Europe Страницы: 64

Бренд: Adler Europe Страницы: 64

Бренд: Adler Europe Страницы: 68

Бренд: Frigidaire Страницы: 6

Бренд: Frigidaire Страницы: 10

Бренд: Frigidaire Страницы: 20

FEQ332ES - 27" Electric Dryer

Бренд: Frigidaire Страницы: 6

Бренд: Frigidaire Страницы: 10

Бренд: Frigidaire Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды