![background image](http://html1.mh-extra.com/html/midea/22031020000054/22031020000054_service-manual_1791489027.webp)
Service Manual
, 2016-12
27
/
46
2.
Remove the clipping strip
Slowly pull it out
3.
Remove the protective cover
1Pry the protective cover slowly from the upper part,
2Pull it out and remove it.
4.
Remove the starter and protector
Unplug the starter and protector (you can use a
screwdriver to pry it slowly)
5.
The reverse process can complete installation.
/
8.7
Display and main control panel
Display control board
1
)
Remove two screws from the refrigerating air
duct with a cross screwdriver;
2
)
Pull all connector terminals out of the
refrigerating air duct to remove its
components;
3
)
Uncover the temperature control indication
sticker on the cover plate of the air duct;
4
)
Gently pry out the PCB installation box with a
straight screwdriver to get the master control
board and installation box components;
5
)
Remove 2 screws using a cross screwdriver to
remove the master control board;
6
)
Pull out the connector terminal and replace
the master control board in reverse steps;
Содержание 22031020000054
