En 13
English
Replacing the Ceramic Disc
The ceramic disc has an expected service life of about 3,000 hours. If the ceramic
disc is used longer than this, the amount of mist generated can drop or fail to be
generated at all. When this happens, replace the ceramic disc (sold separately) using
the procedure below. (See the figure below.)
Turn off the power, unplug the power cord, and drain the water.
a)
Use the special tool to turn the ring holder counter-clockwise, and then remove
b)
the ring holder and ceramic disc from the hybrid humidifier body.
To attach the replacement part, perform the removal procedure in reverse to
c)
attach to the ultrasound vibration plate, and use the special tool to tighten the
ring holder.
Note: 1.
The replacement ceramic disc is protected by a rubber ring to prevent
breakage. When attaching, remove the rubber ring while being careful
not to damage the ceramic disc.
2.
The ceramic disc has a front side and back side. When attaching it, do
so with the front side visible.
When replacing, completely dry the inside.
Special tool
Ring holder
Ceramic disc
Ceramic disc
Rubber ring
Remove the
rubber ring
Hybrid humidifier body
Front
Back
Ceramic disc set
IMM-DISC001
The ceramic disc has a front side
and back side.
• Mount with the front side
facing upward.
01̲MD-KH1001̲3L̲EnFrGe.indb En13
01̲MD-KH1001̲3L̲EnFrGe.indb En13
2012/06/26 11:53:23
2012/06/26 11:53:23
