ATTACHING YOUR CUSTOM DOOR(S) TO THE WOODKIT
NOTE
:
• Only attach your custom door(s) to the woodkit after carefully reviewing the “Specific Instruction
Sheet Order for the C3 Series Woodworker’s Kit Installation Process” on page 6 and confirming you
are working in the correct assembly order.
• After attaching your door(s), use “Adjusting the Door(s)” on page 8 if any final door adjustments are
necessary.
• Generic hinges shown. Inset, partial, and full overlay hinges all attach in a similar manner.
1. Install your door(s) to the woodkit by carefully hooking together the front sections of the hinge
hardware (top hinge pictured) as shown. (
FIGURE A
)
2. Press the outer section of the hinge hardware into the hinge plate until it clicks into place.
(
FIGURE B
)
FIGURE A
Woodkit Side Panel
Door
NOTE
: Hinge, door, and woodkit side panel
isolated for clarity.
FIGURE B
Press outer section of hinge into the plate
until it clicks into place.
Hinge
Hinge
Plate
Page 7
