Page 4
SIDE ASSEMBLY
1) Align Top Bracket (B) with top of Channel (A). Hand tighten Bracket Screws (G). FIGURE C
2) Align Center Bracket (C) with the channel mounting holes.
Loosely tighten Bracket Screws (G). FIGURE D
3) Align Bottom Bracket (D) with the bottom of the channel.
Loosely tighten Bracket Screws (G). FIGURE E
4) Repeat steps 1 - 3 to install a second Channel (A).
5) Fully tighten screws in all locations.
6) Repeat steps 1- 5 for the second side assembly.
NOTES: Bottom of Channels indicated by two mounting holes.
Top of Channels indicated by one mounting hole. FIGURE A
When installing brackets, see FIGURE B for teardrop orientation.
Tools Required For These Steps: #2 Phillips Driver
FIGURE E
FIGURE A
SEE FIGURE C
SEE FIGURE D
SEE FIGURE E
BOTTOM
TOP
G
D
C
FIGURE B
A
(LEFT)
A
(RIGHT)
B
FIGURE D
G
FIGURE C
G
