manualshive.com logo in svg

Midas XL8 DL451, Руководство оператора

Поделиться
Скачать
Midas XL8 DL451 Скачать руководство пользователя страница 76

58

Appendix G: Setting Up An XL8 System

DL451 Modular I/O

Operator Manual

>> To connect the routers to the Stage rack 3 units

•

Mic splitters: 

In 

AES50 audio - bank 1

 on the X router, connect sockets 3 and 4 

to the 

AES50 audio - A

 X sockets on the mic splitters.  Repeat for the Y router, 

using the mic splitters’ Y sockets.

•

Line I/O unit: 

In 

AES50 audio - bank 1

 on the X router, connect socket 6 to the 

AES50 audio

 X socket on the line I/O unit.  Repeat for the Y router, using the  

line I/O units’ equivalent Y socket.

>> To connect the XL8 to the line I/O units (FOH rack)

Connect the 

AES50 audio

 X sockets on the rear of the XL8 Control Centre to the 

AES50 audio

 X socket on both of the line I/O units in the FOH rack.  Repeat for the Y 

sockets.

>> To connect the XL8 to the RAPIDE

Connect one of the eight 

ETHERNET

 (EtherCon® XLR) sockets on the rear of the 

RAPIDE unit to the 

Ethernet control 1

 socket of the active network (X or Y) on the 

rear of the XL8 Control Centre (see “XL8 system interconnections” on page 60).

>> To daisy chain the DSP units

Important Note:
Do not connect a cable to like numbered sockets, that is, “0” to “0” or “1” to 
“1”, as the DSPs will not work; socket numbers are printed to the right of each 
socket.

There are two default configurations available, depending on the lengths of the 
interconnecting DSP cables supplied, that is, 0.25 m cables or 0.5 m cables.  Both 
options contain a long cable for connecting the top and bottom units, and the 0.25 m 
option has an additional long cable for connecting units AMU 2 and AMU 9.

A cable’s length (cm) can be determined from a three-digit number contained 
within its part number (printed on a label attached to the cable).  For example, in 
a part number of “14150-EZBB-050-0LC 060425TD” the “-050-” indicates a 
length of 50 cm.

Connect the DSPs together as shown in the following diagram, according to the cables 
supplied with your system.  (In the diagram, the cables are coloured and the sockets 
numbered to help distinguish them.)

Содержание XL8 DL451























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды