Midas XL8 DL451, Руководство оператора

Страница: 49 / 86

DL452 digital I/O module
31
DL451 Modular I/O
Operator Manual
DL452 digital I/O module
The DL452 digital I/O module provides four (stereo) AES/EBU inputs and outputs. Its
rear panel houses these I/Os in four pairs. Each input has a
check and a sync LED and
each output has a check and a mute LED.
Each AES/EBU input can run at sample rates up to 96kHz (44.1Hz, 48kHz, 88.2kHz and
96kHz) using a sample rate converter (SRC). If the digital input is synchronous with
the system clocks, the SRC can be bypassed to remove approximately 1ms of delay,
which is inherent in the sample rate conversion process.
Each AES/EBU output can also run at sample rates up to 96kHz by using an (SRC).
There are two potential clock sources for the digital outputs: the system and the
coinciding digital input. When using the system to drive the digital outputs, the output
SRC is bypassed and the sample rate of the output is matched to the system. When the
digital input clocks are used to drive the digital outputs, the SRC is enabled and the
audio output is converted from the sample rate of the system to the sample rate of the
digital input.
Item Description
1 Four pairs of digital AES3 (AES/EBU) XLR inputs and outputs.
2 Green check LED illuminates to indicate when a channel is selected on a
console. These are controlled by the console and used as a visual aid to
locate specific connectors.
3 Red sync LED illuminates to indicate that a valid AES3 connection is
present on the digital input.
4 Red Mute LED illuminates to indicate channel is muted.
1
2
3
2
4