Midas XL48, Руководство пользователя

Страница: 17 / 32

17 Operator Manual
1
3
4 5 6
7
8
9
10
2
11
3. Front Panel
(1) low pass
control knob — adjusts the low pass filter in the range
1 kHz to 40 kHz.
(2) Gain control knob — adjusts the mic gain in the range +10 dB to +60 dB.
(3) high pass
control knob — adjusts the high pass filter in the range
10 Hz to 400 Hz.
(4)
Ø button — this polarity button reverses the phase by 180°. The integral
green LED illuminates to show that this button is on.
(5)
PAD button — this button reduces the mic signal by 20dB. The integral
yellow LED illuminates to show that this button is on.
(6) 48 V
button — this phantom power button, when on, su48 volts to
the mic. The integral red LED illuminates to show that this button is on.
(7)
Meter — this 8-segment LED meter shows the signal level (dB).
(8)
Sample frequency LEDs — one of these four blue LEDs will illuminate to
show which sample rate frequency (kHz) is currently selected, that is, 44.1 k,
48 k, 88.2 k or 96 k.
(9)
Synchronisation (sync) source LEDs — either of these LEDs will illuminate to
show the current sync source (internal or external).
(10)
Selection switch — use this switch to choose the sample frequency and
clock sync.
(11)
There are four cut-outs for rack mounting fixings.
midasconsoles.com