Midas RTE-V821-PC, Руководство пользователя

Страница: 24 / 27

RTE-V821-PC USER’ S MANUAL
23
10. RTE COMMANDS
When the monitor and server are connected, the TARGET window is opened. The RTE
commands can be issued in this window. The following table lists the RTE commands.
Command Description
HELP, ? Displays help messages.
INIT Initializes.
VER Displays the version number.
INB, INH, INW I/O read
OUTB, OUTH, OUTW I/O write
SFR Displays or sets the internal I/O
RTE Commands
Some commands require parameters. All numeric parameters such as addresses and data
are assumed to be hexadecimal numbers. The following numeric representations are invalid:
0x1234 1234H $1234
10.1. HELP (?)
<Format> HELP [command-name]
Displays a list of RTE commands and their formats. A question mark (?) can also be used in
place of the character string HELP. If no command name is specified in the parameter part, the
HELP command lists all usable commands.
<Example> HELP SFR
Displays help messages for the SFR command.
10.2. INIT
<Format> INIT
Initializes the RTE environment. Usually, this command should not be used.
10.3. VER
<Format> VER
Displays the version number of the current RTE environment.
10.4. INB, INH, AND INW
<Format> INB [address]
INH [address]
INW [address]
Read an I/O register. The INB, INH, and INW commands access in byte, halfword, and word
units, respectively. If an address is omitted, the previous address is assumed.
<Example> INB 1000
Reads a byte from an I/O register at 1000H.