Midas LEGEND 3000, Руководство оператора

Страница: 53 / 84

Recalling Scenes:
There are 3 methods by which scenes can be recalled:
1/ Stepping through existing scenes using the LAST and NEXT switches.
This steps through the scenes in numerical order.
2/ Select the Act/Scene number using the ACT/SCENE, UP and DOWN switches.
When the correct scene number is displayed, press the NOW switch and the scene will be recalled.
Inserting Scenes:
1/ Once you have created the scene you wish to insert, change the Act/Scene number using the ACT/ SCEN E,
UP and DOWN buttons until it displays the desired scene number.
2/ Press the INSERT switch. The screen will then display DONE.
The original scene and any scene following it will then be incremented by one position.
Note: The INSERT button will only be illuminated if a scene exists where you wish to place the new scene,
otherwise STORE may be used as normal.
Copying Scenes:
1/ Recall the scene you wish to copy by selecting the scene number and pressing the NOW button.
2/ Press the COPY switch. The Act/Scene numbers can now be scrolled through using the ACT/SCENE UP
and DOWN switch. Once the desired position is reached the scene is copied to that position by pressing the
CONFIRM switch.
Previewing a Scene:
To preview a scene without effecting your mix use the following method:
1/ Select the scene number on the display using the ACT/SCENE UP and DOWN switches.
2/ Once the desired scene is displayed, the automated switch configuration stored for that scene can be vie wed
by pressing the CHECK switch. This does not affect the present setting on the desk. The screen will also
display Legend configuration and Midi data.
3/ Pressing the CHECK switch again will drop you back into normal mode.
Deleting a Scene:
Recall the scene you wish to delete, or dial up the scene number on the display using the ACT/SCENE UP and
DOWN switch. Press the DELETE switch, and you will then be asked to confirm this. Press the CONFIRM switch
the screen will then display DONE when the scene is deleted.
Clearing The Console Memory:
To clear the memory in the console use the following steps:
1/ Press the SYSTEM menu and scroll to CLR, press CONFIRM
2/ The screen will read SURE, press CONFIRM.
3/ The screen will read WAIT and then DONE.
The memory in the console will now be cleared, the automated settings on the work surface will remain
untouched until the NOW button is pressed, which will recall the default settings of scene 0000.
43