I n s t a l l a t i o n a n d u s e r m a n u a l
H P 9 0 0 / 1 2 0 0 S P L I T P R E M I U M
V e r s i o n : 0 1 / 2 0 1 7
P a g e
3 6
/ 3 6
HEAT P
U
M
P
MI
C
R
O
W
E
L
L
HP
h)
Check the evaporator surface and make sure that the lamellas are not compressed. It is
possible to flatten out the lamellas by a flat, non–edgy tool. Please be advised that the
evaporator fins are easy to compress mechanically. The warranty does not cover any
mechanical damage caused on the lamellas.
i)
Regularly check the screws, fixing the device to the base, screws fixing the covers.
j)
Depending on agressivity of exterior environment (acid rain, chemical industry in vicinity, high
UV, sea or ocean in vicinity, etc.) it is possible for a rust to appear on metal parts. It is
suggested to threat this rust in order to avoid its spread.
k)
Do not clean inner parts of water heat exchanger with hot water. The heat exchanger will get
damaged if water temperature inside it rises above 60°C.
l)
All the above measures must be performed by a trained technician.
m)
The maintenance of the refrigeration or electrical system must be performed by authorized
technicians only.
8.2
Warranty
Your heat pump is covered by warranty. For particular conditions of this warranty in terms of warranty
period and subject please refer to your local regulations and/or agreement with your distributor,
reseller or installer. Any action resulting in damage of the heat pump, property or other damage
caused by improper usage of this product or in contrary with this Installation and user manual is
excluded from warranty coverage.
Distributed by:
Manufacturer:
MICROWELL, spol. s r.o.
SNP 2018/42, 927 01 Sala, Slovakia
tel.: +421/31/702 0540
fax: +421/31/702 0542
e-mail: [email protected]
w w w . m i c r o w e l l . e u
