Microtronix Access User Guide
4.3 SNMP
An SNMP agent is enabled by default in the Access Gateway, and will respond to requests if polled.
The RO Community name must match that used by the the remote SNMP client. The client may
change the system parameters, in which case the RW Community name must also match.
If the Trap IP Address is defined, then system startup and interface alarms will be delivered to the
SNMP management server at that address. The Trap Community name must be changed to that
expected by the server.
The SNMP parameters may be modified using the form and clicking the Apply button. Changes will
take immediate effect.
4.3.1 SNMP Parameters
System Description:
A string describing the system name.
System Location:
A string describing the system location.
System Contact:
A string describing the system contact information.
RO Community:
A string describing the community for read-only access.
RW Community:
A string describing the community for read-write access.
Trap Community:
A string describing the community for traps.
Trap IP Address:
The address of the SNMP server listening for traps.
23
