Microtronix Access User Guide
Note:
Upon updating the primary Ethernet adapter configuration, the web interface will automatically
redirect the browser to its updated location, if reachable.
4.2.2 System Parameters
Hostname:
The host name assigned to the Access Gateway.
Default Gateway:
The IP address of the default gateway which provides access to external
networks.
Use DNS:
To specify DNS servers for domain name resolution, check the “Use DNS” box and
enter the desired addresses in the provided fields. Up to three servers can be specified.
4.2.3 Interface Parameters
Network interfaces may be modified and added. The “eth0” interface refers to the Ethernet 10/100 port.
VLAN interfaces may be added to “eth0”.
Interface Name:
The label assigned by Linux to the Ethernet adapter. The default primary
Ethernet adapter is labelled “eth0”, secondary IP labels appear as “eth0:x, and VLAN labels
appear as “eth0.
x
” where x is an integer from 0 to 255
Configuration:
To specify a static IP address for the interface, select “Static”. To have a DHCP
server assign IP network settings automatically, select “DHCP”. When the DHCP option is
selected, the following parameters are disabled.
IP Address:
The IP address used for web interface access and route connections.
Netmask:
The subnet mask which specifies the gateway's network accessibility.
Gateway:
The IP address of the gateway on this subnet. This field is not used for defining the
default gateway – see System Parameters above.
22
