Microtronics 300871, Руководство пользователя, Страница: 28 / 70

4. If the connection cable is considerably longer than required to position the pressure sensor in the
required installation position, you can roll up the excess part of the cable within the cable holder of the
mounting fixture. The cable holder can hold up to 3m of cable. Roll up the cable in a clockwise direction.
Start in such a way that the cable runs from the tension clamp towards the left upper bracket and the
circle then continues towards the right upper bracket.
Important note: When rolling up the cable, it must be ensured that the bend radius does not
fall below the minimum permissible value of 60mm .
Rolling up the connection cable
1 Cable holder 2 Bracket
28 Rev. 02