22 ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual
The Paper Stabilizer located at the bottom of the scanner cover is majorly designed
to keep the stability for the paper stacks when they fall into the output tray from
the output slot of the scanner. It is very helpful to scan documents with mixed
paper sizes.
To open it, bring it down gently from the top towards the direction as shown in
the graph.
Paper Stabilizer
NOTE:
If the papers to be scanned are too thin, please do not bring down the
Paper Stabilizer.
In case if needed to close the Document Output Tray, please remember to follow
the steps bellow:
1. Bring up the Paper Stabilizer.
2. Then, push back the Output Tray Extender if it has been pull out.
3. Finally, raise the Document Output Tray to close.
