Microsound MD 602, Инструкция по эксплуатации

Страница: 4 / 4

Md602.doc Page 4 of 4 14/01/2010
6. Adjustments
The system is factory setup but small adjustments can be made to the volume in both directions. The master side has background
noise sensing therefor after any adjustments are made wait for 30 seconds before testing to allow the system to settle down.
The adjustment is made through the bottom of the master station as per the stickers, with a very small jewels star screw driver.
Care must be taken when making adjustments so as not to damage the preset pots inside.
7. Technical Specifications
Power Supply
15vdc (ac adaptor).
Current drain 50ma Idle.
110 ma Maximum.
Audio output power 100 mw max at master.
150 mw max at loudspeakers.
Frequency range 500 Hz to 5000 Hz.
Cabling Single core screened to microphone.
Single twin flex to loudspeaker.
Single twin flex to PSU.
Cable distance
20 metres maximum.
Dimensions of master 95 mm width.
65 mm height.
205 mm length.
Dimensions of loudspeakers 95 mm width.
110 mm height.
60 mm depth.
Microphone strip 16 x 16 x 1000 mm YT1 EGA trunking.
Loudspeakers impedance 16E minimum (2x8E).
Manufactured by:
Microsound Systems cc
P.O. Box 38220
Booysens
2016
Phone 011 493-2424
Fax 011 493-0347
Web
www.microsound.co.za