13
X22-19688-01
Step 2: Device C-cover Keyboard Removal
IMPORTANT:
Surface Laptop 3 devices are built with either a fabric type or metal type C-cover keyboard
assembly. The C-cover removal process differs differs between the metal type C-cover and the fabric type
C-cover. Be sure to follow the proper procedure based on the device model and associated C-cover type.
Removal Process (C-cover Keyboard Metal Type)
Preliminary Requirements
IMPORTANT:
Be sure to follow all special (bolded) notes of caution within each process section.
Required Tools and Components
·
Tools:
o
5IP (Torx-Plus) driver
o
Anti-static wrist strap (1M Ohm resistance)
o
Recommended: ESD-safe Battery Cover (13.5” or 15”)
·
Components:
o
New 5IP screw qty=4
o
C-cover (If replacing)
Prerequisite Steps:
·
Power off device - Ensure device is powered off and disconnected from a power supply.
·
General Safety - Check to make sure that general guidelines and ESD compliance steps are followed prior to
opening device. Refer to Prior to Device Disassembly section (
) for details.
·
Remove feet - Follow steps for Procedure-Removal (Non-Skid Foot Pad) section (
) prior to
C-cover removal.
IMPORTANT:
Be sure that all foot adhesive remains have been removed from the bottom device case
foot sockets prior to C-cover screw removal to avoid the risk of stripping out the C-cover screw(s).
