Gigabit Ethernet Switch – Hardware Manual
Page 24 of 36
_______________________________________________________________
©2016_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
CABLE LABELING AND
CONNECTION RECORDS
When planning a network installation, it is essential to label the opposing ends of cables
and to record where each cable is connected. This will allow user to easily locate inter-
connected devices, isolate faults and change your topology without need for
unnecessary time consumption.
To manage the physical implementations of your network, follow these guidelines:
◆
Clearly label the opposing ends of each cable.
◆
Using your building’s floor plans, draw a map of the location of all network-
connected equipment. For each piece of equipment, identify the devices to which
it is connected.
◆
Note the length of each cable and the maximum cable length supported by the
switch ports.
◆
For ease of understanding, use a location-based key when assigning prefixes to
your cable labeling.
◆
Use sequential numbers for cables that originate from the same equipment.
◆
Differentiate between racks by naming accordingly.
◆
Label each separate piece of equipment.
◆
Display a copy of your equipment map, including keys to all abbreviations at
each equipment rack.
