Hardware Assembly
ZLK38AVS User Guide Revision 3.0
5
4
Hardware Assembly
To assemble the ZLK38AVS kit the following instructions should be followed:
4.1
Pillar Assembly
1.
Screw in the Raspberry Pi onto the front side of the Raspberry Pi mounting ring and add the 2nd set
of standoffs
Figure 3 •
Mounted Raspberry Pi with standoffs attached
2.
Add the standoffs to the ZLE38AVS evaluation board
Figure 4 •
ZLE38AVS board with standoffs attached
3.
Plug in the ZLE38AVS evaluation board and add the remaining screws
Figure 5 •
ZLE38AVS board attached to mounted Raspberry Pi
4.
Place the speaker facing downwards into the lower plastics