© Microsemi Corp.
Microsemi
Page 15
Rev.B01 CPG
– Poe BU
One Enterprise Aliso Viejo, CA 92656 USA
4
Power over Ethernet Midspan
Installation
The following sections describe how to install a Power over Ethernet
Midspan.
4.1 Background Information
As shown in Figure
4-1, Midspan is connected in series to an Ethernet
switch/hub. Switch’s data output terminals are connected to Midspan.
Midspan delivers power over 4-wire twisted pairs (pins 7/8, 4/5 and pins
1/2, 3/6) in PD-96xxG series of Category 5e cabling, regardless to data
quality. Most installations require Midspan to be rack-mounted.
Figure
4-1: Typical Installation
4.2 Verifying Kit Contents
Unpack kit and verify the following items are included:
Power over Ethernet Midspan
Mounting brackets (for 19-inch racks) and a plastic cover
Screws for assembling mounting brackets
Self-adhesive rubber feet