LVS-7510 Integrated System Installation and Quick Start Guide for Zebra Printers
LVS-7510 Integrated System Installation and Quick Start Guide for Zebra Printers
Page 14 of 16
For Peel and Present Option
1. Set up the printer in tear-off mode using the printer GUI. Set the tear-off to 90. (This may need to be
adjusted later to achieve optimum peel performance.)
2. Follow the printer manual for other printer settings relevant to your specific print job and label type,
including media/ribbon calibration.
3. Remove some labels from the web, swing the rewind bar down using the thumbscrew on the side, and
route the web through the printer and the mount as shown below. Feed a label and check the ease of
removal of the peeled label from the printer. Adjust tear-off as needed.
