LVS-7510 Integrated System Installation and Quick Start Guide for Zebra Printers
LVS-7510 Integrated System Installation and Quick Start Guide for Zebra Printers
Page 12 of 16
For Base Version (Non-PNP Option)
1. Set up the printer in rewind mode using the printer GUI.
2. Follow the printer manual for other printer settings relevant to your specific print job and label type,
including a media/ribbon calibration.
3. Route labels through the printer and the mount as described in the following scenarios:
a. Without the internal rewinder:
Route labels as shown below. Refer to the printer manual for
instructions for routing ribbon if applicable.
