Microscan HawkEye 40T Скачать руководство пользователя страница 40

Страница: 40 / 94

Chapter

Getting Started

1-30

HawkEye™ 40T User Manual

Rev 2.0.0, Jan 2009

Note: The HE40T can read a symbol that is not centered; however, the

HE40T performs best when a code is centered.

The HE40T features omnidirectional decoding. Aiming the targeting laser at

the center of the symbol ensures the best performance for decoding. The

HE40T can read a symbol that is not centered and, under certain

circumstances if multiple symbols are within the field of view, the user must

take care of which symbol is read. The decoder will start from the center, but

if the center symbol is not decodable, it may decode another symbol, if

multiple symbols are present within the field of view.

The HE40T was developed to decode both very small 2-D symbols and

larger 1-D symbols. The reader features two imagers to create an innovative

dual decode zone. The HE40T features a high speed processor and decodes

both zones simultaneously, by default. The reader has one imager focused on

a near-field for smaller codes (optimal focal point is 4 inches) and one

imager focused on a far-field for larger codes (optimal focal point 9 inches).

To read smaller symbols, move the HE40T closer to the symbol. To read

larger symbols, move the reader farther away from the symbol. The entire

HE40T decode zone varies between two (2”) and twenty (20+”) or more

inches.

Hold the HE40T still - DO NOT SWIPE OR MOVE THE READER. Press

the trigger until the HE40T beeps, indicating the code has been successfully

decoded.

To read a symbol with a shiny background, hold the HE40T slightly tilted to

avoid the reflected light from the LEDs.

The reader may be optimized to your specific environment by scanning

codes in Chapter 6, “Advanced Decoder Performance”.

Содержание HawkEye 40T































































































Результаты поиска

Содержание HawkEye 40T

Отзывы:

Бренды по названию

Популярные бренды

Microscan HawkEye 40T, Руководство пользователя

Результаты поиска

Содержание HawkEye 40T

Отзывы:

Бренды по названию

Популярные бренды