Microscan HawkEye 40T, Руководство пользователя

Страница: 31 / 94

Bluetooth Radio Operation
Ge
tting
S
tar
ted
1
Rev 2.0.0, Jan 2009 HawkEye™ 40T User Manual
1-21
FIGURE 1–26.
QuickConnect Code
The QuickConnect code has the information of the Bluetooth address (often a
reference to go to the BD_ADDR) of that device. You can usually find the
12-character Bluetooth address somewhere on the device near the device’s serial
number (Figure 1–26). This code will link your HE40T directly to the desired
Bluetooth device.
Note: While installing the Bluetooth Configuration Manager software that was
included with your Bluetooth adapter, make sure to note the Virtual COM Port
number the software assigned for the adapter (e.g. COM 10). This is the COM
Port your HE40T will connect through.
To connect your reader, scan the Reset to Factory Defaults code in Figure 1–27.
Then, the QuickConnect Code and your HE40T will automatically connect. You
should also scan the Save Settings code if you want to save these settings.
Note: If the HE40T reader powers off without scanning the Save Settings code,
you will lose your settings.
FIGURE 1–27.
Reset to RF Factory Defaults Code
Reset to RF
Factory Defaults Save Settings