8
R-T 25A
Pr
og.
N
N
L
L
IN
LOAD/CONTACTOR*
*Can also control a contactor.
This is recommended when
RC circuit is wired in parallel
with coil on contactor.
Deletion of connected units on Relay
Hold the programming button in for 8 s until the Red diode
begins to light up. Do not release the button until this diode
starts to flash. All connected units are now deleted.
Installation information
Blue
Yellow
Red
Green
Programming button
Green
Lights up continuously while the relay is connected.
Flashes if there is no communication with the sensor *
Red
Flashes when paired units are deleted or
if the command from the sensor is rejected.
Yellow
Flashes when the relay is set to pairing mode.
Blue
Indicates radio communication. Flashes when
button on sensor is pressed. *
* Green and blue flash simultaneously when relay is in emergency mode.
Explanation of LEDs
