Microplex PP 404, Руководство пользователя

Страница: 115 / 248

Appendix A Configuration of the printer
A-15

PRE-SEPARATION (is used for the ASF cassettes at the Multi-purpose Printer only)
During normal printing, a sheet of paper is not inserted from an ASF cassette before the
preceding sheet has been ejected.
By selecting PRE-SEPARATION = YES the sheets follow each other more closely, thereby
increasing the printer's throughput
Main-Function INSTALLATION:
Sub-Function INTERFACE

BUFFER
Buffer size in Kbyte. The maximum size is 176 Kbyte

WORD LENGHT
Length of the data to be transferred; values are 7 or 8 bit

I/F TYP Interface TYP)
the following types are available:

PARALLEL

SERIAL

USB

Ethernet
In case the SHARED mode interface type is selected the printer switches automatically between
the parallel and serial interfaces. The first data received at the port determine which interface
port becomes active. The other interface port will be closed so that only one interface is active
at a time (for detailed information see Appendix B Interface Description).
To activate the USB port use following steps on the Printer:

Select USB by setting the asterisk (*) and SAVE this setting.

Power off and wait until the display and the yellow light on the Operator Panel will
be dark.

Power on your Printer again and wait until the host recognized the printer (a short
sound). Now the Printer is ready to receive data from the host.
The factory setting for the interface type are: Shared, 8 Kbyte Buffer, 8 bit word
length, even parity bit, 9600 baud rates, and DTR protocol.
Note:
The printer drivers (see included CD-ROM) must be installed and configured
before.