Microplex PP 404, Руководство пользователя

Страница: 76 / 248

4-16
Troubleshooting and Diagnostics
4.3.1 Operation-related Problems
Paper is not positioned at perforation for tear-off feature

Select the correct form length using the Set-up feature.

Reset top of form by performing a Parking function.

Refer to section A.4 Vertical Positioning Adjustment
Paper tears or jams

Examine the paper path; remove any obstructions.

Is the paper too loose or too taut between the tractors?

If the holes in the paper are deformed at their outer edges, the paper is too
taut.

If the paper rises between the tractors, it is too loose.

Readjust the tractor spacing so that the paper lies smoothly but without any
tension.

Ensure that the paper is horizontally aligned on the pins.

Open the printer's top cover. If necessary, loosen the two green screws and
remove the paper guide plate to gain access to the paper.
Parking paper and resetting top of form

Tear off the paper at the perforation line.

Press

Press Until the paper is in the park position.

Press Printing will resume at the top of the next form.
Print head carriage does not move smoothly/does not move at all

Examine the paper pathway. Remove any obstructions

Examine the carriage area for obstructions. Remove, where necessary.
Press the key
when the paper pathway is cleared.

Make sure that the transport lock has been removed.
Single sheets are skewed (ASF Cassette only for Multi-purpose Printer)

Adjust ASF cassette paper guides.
More information you will find in the enclosed references of the ASF cassette.