1.1 Operating Principle
This device is an unit that consists of a main body, BLDC (brushless DC) motor, and foot pedal switch
for driving and operating a handpiece for dental implant procedures, to be used in dentistry in the field
of implant surgery.
The main body of this device is powered by an external power supply that converts alternating current
to direct current, which turns the BLDC motor; the rotation power of which combines with the handpiece
to perform the dental implant procedure.
The main body of the implant unit can be adjusted in terms of its torque, rotation speed, water injection
volume, and rotational direction.
The BLDC motor can be operated using the foot pedal switch.
1.2 Purpose of Use
This is an engine used to power handpieces used for implants when performing
dental implant procedures.
1.3 Users
Only qualified dentists may use this device in a professional environment..
1.4 Indications of Use
1) Where there is an absence of gum or teeth caused by cavities, gum disease, accidents or tumors.
2) Where enamel ablation is not recommended so as to protect the adjacent natural teeth.
3) Where the patient does not want denture treatment.
4) Where the patient wants to replace partial or full dentures that were previously used with a fixed-type
dental prosthesis.
5) Where the patient wants full dentures to be replaced with some partial dentures and some fixed-type.
6) Where the patient requires implant support in relation to the lower dentures to maintain the full denture
and also improve its function.
1) Be sure to read the user manual prior to use.
2) Only to be used by a professional in a professional environment..
3) Not to be used for anything other than its intended use.
1.5 Checklist Prior to Use
Chapter 1. Overview
3/24