LiteStick
(Build Instructions)
Before You Start
This airframe has been designed to fit together easily with all components precision drilled and
CNC cut from high quality balsa and paulownia wood. However, you will be working with very
small components, so you will need patience and keen eyesight. We recommend working in a very
well-lit area and taking a break between stages to rest the eyes and hands. Most of all, take your
time, enjoy the building experience and you will be proud of what you have produced in the end.
Specifications
Wingspan: 37cm
Length: 27cm
Flying Weight: 24grams
Channels: 3 (Rudder Elevator Throttle)
Suggested Receiver: 3 - 4Ch Micro
Airframe Kit
(Included Contents)
* Airframe Surface Parts (balsa)
* Airframe Skeleton (hardwood)
* Carbon pushrods
* Control linkages
* Undercarriage with Wheels
* Fine sand paper
* Geardrive, Prop and Prop Saver
* Decal Stickers
Needed to Complete
* Thick CA Glue or UHU Hart Glue
* Micro Phillips Head Screwdriver
* Hobby Knife
* Ruler
* Hobby Masking or Other Tape
* Patience
* Keen Eyesight
* Steady Hands
* Receiver Transmitter Charger Battery
(see instructions for suggested RC gear setup)
