manualshive.com logo in svg

Micronics M7S-Hi, Руководство пользователя

Поделиться
Скачать
Micronics M7S-Hi Скачать руководство пользователя страница 67

M7S-Hi System Board Manual

Appendix E: Updating the System BIOS

65

Updating the System BIOS

The Micronics system boards are designed so that the
BIOS can be reprogrammed using a BIOS file. You can
easily FLASH a BIOS by following the steps below:

1) After downloading the appropriate BIOS file from

our BBS or Website, extract it to a bootable MS-
DOS 6.X or Windows 95 diskette.

2) If you are using MS-DOS 6.X, reboot your system

with the bootable diskette in the A: drive. To make
sure a clean DOS environment is loaded, press the
F5 key while "Starting MS-DOS" is displayed. After
the system has rebooted, the cursor will appear at
the A:\> prompt.

3) If you are using Windows 95, press F8 when you see

"Starting MS Windows 95." Select the option "Safe
Mode Command Prompt."

4) Now you can run the FLASH utility.  The filename

will be either "FSH" (or FSH20, FSH20G, etc.) or
"PHLASH." Type this filename at the A:\> prompt
(but don’t include its extension), followed by a space
and the BIOS ROM image’s filename. This file will
be included in the download and has a file length of
about 131K or 262K. For example, to update the
M7S-Hi to BIOS version 02, you would type:

PHLASH M7S-Hi.02P     [ENTER]

5) After the update process is completed, turn off the

system.

6) Turn the system back on and verify that the new

BIOS version appears on the screen.

NOTE: If the BIOS is somehow erased or does not seem
to accept the upgrade, you can purchase a new BIOS
from MicroNiche Information Systems (800-733-9188).
There is a $30.00 fee plus shipping charges for this
service. (Price and availability subject to change.)

E

Appendix

If you
encounter
any
problems
during this
process, or
if you have
questions
about the
procedure,
please call
Technical
Support.

Содержание M7S-Hi

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды