Micronics M7S-Hi, Руководство пользователя

Страница: 16 / 80

M7S-Hi System Board Manual
Chapter 2: Configuring the M7S-Hi
Table 2-3: Jumper settings for the system soft power down.
Table 2-4: Jumper settings to clear the BIOS CMOS
settings. With your computer's power off, close pins 2-3,
then turn the power on for about five seconds. Turn the
power off and place the jumper back on pins 1-2. (The
jumper must be placed back on pins 1-2 for the system to
function properly.)
NOTE: This will reset all BIOS default settings. Any changes
you have made will be lost.
Table 2-5: Jumper settings to configure the cacheable
DRAM range (optional).
14
Jumper Function Settings
W14 Enable (default)
Disable Open
Close
Table 2-3: System Power Down Selection
Jumper Function Settings
W10 Normal (default)
Clear CMOS 1-2
2-3
Table 2-4: Clear CMOS Selection
Jumper Function Settings
W12 Normal (default)
Extended Open
Close
Table 2-5: Cache DRAM Range Selection