manualshive.com logo in svg

Micronics M7S-Hi, Руководство пользователя

Поделиться
Скачать
Micronics M7S-Hi Скачать руководство пользователя страница 35

M7S-Hi System Board Manual

Chapter 4: The BIOS Setup Utility

33

Video BIOS

The Video BIOS category allows you to Shadow or
Shadow & Cache the video BIOS.  Choosing Shadowed
& Cached (default) caches the shadowed video BIOS for
even higher performance. Choosing Shadowed copies
the video BIOS into RAM for faster execution. To
disable the Video BIOS category, select Disabled.

System BIOS

The System BIOS category allows you to Shadow or
Shadow & Cache the system BIOS. Choosing Shadowed
& Cached (default) caches the shadowed system BIOS
for even higher performance. Choosing Shadowed copies
the system BIOS into RAM for faster execution. To
disable the System BIOS category, select Disabled.

System Memory

The System Memory category identifies the size of the
base memory. It cannot be changed.

Extended Memory

The Extended Memory category automatically detects
the amount of memory installed above the amount in the
System Memory category. Because the BIOS automati-
cally calculates the amount of memory installed in your
system, you cannot change this category without adding
or removing memory.

Содержание M7S-Hi

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды